02/04/2021 07:57:23

Wiper Arm - LH (Remove and Replace)

Correction Code 17500302

Special tools recommended for this procedure:

Supplier Part Number Description
Tesla 1058696-00-A Wiper Arm Removal Tool

Removal

Informational PurposesAn informational icon, calling your attention
Note
Images show both wiper arms for convenience.
  1. Turn the wipers off.
  2. Open the hood.
  3. Mark the installed position of the wiper arm on the windshield.
  4. Touch Controls > Service > Wiper Service Mode > ON to move the wipers to the service position.
  5. Remove the nut that secures the wiper arm to the wiper spindle (torque 31 Nm).
  6. Place the base of the wiper arm removal tool under the wiper arm and position the set screw so that it is centered and touching the wiper arm stud, and then tighten the set screw until the wiper arm is released.
    Warning IconA warning icon, calling your attention to a possibly risky situation
    CAUTION
    Removing the wiper arm without the wiper arm removal tool can result in damage to the wiper arm or wiper motor.
  7. Press the retaining clip and slide the blade from the wiper arm.

Installation

  1. Installation procedure is the reverse of removal.