02/03/2020 13:50:14
LF Antenna - Center - Rear (Remove and Replace)
Correction Code 17451802
Warning
If the vehicle has air
suspension, activate "Jack" mode on the touchscreen before raising and
supporting the vehicle.
Removal
-
Raise and support the vehicle (refer to procedure)
WarningDo not work on an incorrectly supported vehicle.WarningTo avoid personal injury, use appropriate equipment when performing this operation.
-
Remove the rear diffuser (refer to procedure)
NoteThese graphics show the 1st generation antenna. This procedure is valid for the 1st and 2nd generation antennas.
-
Remove the screws (x2) that secure the LF antenna to the body (torque 2
Nm).
-
Disconnect the harness connector and remove the LF antenna.
Installation
-
Installation procedure is the reverse of removal.
NoteClean the affected areas before installation.