2022-11-02

Antenna - GPS (Remove and Replace)

Correction Code 21320102

Removal

  1. Remove liftgate glazing. See Liftgate Glass (Remove and Install).
  2. Disconnect GPS harness connector.
  3. Release GPS antenna from adhesive bond.
  4. Release wiring harness from liftgate.
    Informational PurposesAn informational icon, calling your attention
    Note
    Note installed position of components before removal.
  5. Remove GPS antenna.

Installation

  1. Installation procedure is the reverse of removal.
    Informational PurposesAn informational icon, calling your attention
    Note
    Clean the affected areas before installation.
    Warning IconA warning icon, calling your attention to a possibly risky situation
    Warning
    Only use cleaning agents and solvents in a well-ventilated area.