2020-08-28

Module - Liftgate Control (Remove and Replace)

Correction Code 11334802

Removal

  1. Remove the RH side trunk trim (refer to procedure).
  2. Disconnect the harness connectors (x2) from the electric park brake (EPB) module.
  3. Disconnect the harness connections (x2) from the liftgate control module.
  4. Remove the nuts (x4) that secure the bracket to the wheelhouse studs (torque 3 Nm).
  5. Remove the bracket and modules assembly.
  6. Remove the nuts and bolts (x3) that secure the modules to the bracket (torque 2 Nm).
    Warning IconA warning icon, calling your attention to a possibly risky situation
    CAUTION
    Replace all patchbolt(s).
  7. Remove the liftgate control module from the bracket.