Consumable Parts
Bolts
All patch bolts need to be replaced due to wear and tear during disassembly, except for those on aero shield panels, which can be reused after applying adhesive.
Safety-sensitive bolts must be replaced (e.g., seatbelt bolts or seat fixing bolts).
| Part Number | Description | Quantity |
|---|---|---|
| 2007060 | Bolt that attaches the subframe to the body | 1 |
| 2007098 | Bolt that attaches the knuckle to the steering gear input shaft | 1 |
| 2007106 | Bolt that attaches the front lower lateral link to the subframe | 1 |
| 1004350-00-A | Bolt that attaches the upper control arm to the knuckle | 1 |
| 1008722-00-A | Bolt that attaches the high-voltage battery to the front of the vehicle | 4 |
| 1009169-00-A | Bolt that attaches the high-voltage battery to the subframe and body | 2 |
| 1009778-00-C | Bolt that attaches the high-voltage battery to the body | 12 |
| 1012845-00-A | Car computer fixing bolt | 4 |
| 1022449-00-A | Third row seat frame fastening bolt | 4 |
| 1036655-00-A | Steering wheel fixing bolt | 1 |
| 1038934-00-A | Inverter three-phase fixing bolts (with thread glue) | 3 |
| 1064997-00-A | Bolt that attaches the left motor bracket to the body | 2 |
| 1088968-00-B | Caliper fixing bolt | 2 |
| 1108552-00-A | Bolt that attaches the knuckle to the lower end of the steering column | 1 |
| 2007104-00-B | Booster fixing bolt | 4 |
Nuts
Nylon nuts applied to chassis and suspension systems are typically classified as consumable parts. Reuse may compromise preload force integrity.
Nuts specified for control module installations (e.g., safety control modules, CarPC modules) are generally non-reusable.
| Part Number | Description | Quantity |
|---|---|---|
| 2007088 | Nut that attaches the active damper to the top of the shock tower | 3 |
| 1004351-00-A | Nut that attaches the upper control arm to the knuckle | 1 |
| 1004356-00-B | Nut that attaches the tie rod end to the knuckle | 1 |
| 1004358-00-C | Nut that attaches the front rear lower fore link to the knuckle | 1 |
| 1006484-00-A | Nut that attaches the front lower lateral arm to the subframe | 1 |
| 1006883-00-A | Nut that attaches the knuckle to the lower end of the steering column | 1 |
| 2007059-00-B | Nut that attaches the upper control arm to the vehicle | 1 |
| 2007090-00-C | Nut that attaches the front stabilizer bar link to the stabilizer bar and knuckle | 2 |
Others
All label stickers are designated as single-use items; replacement is required after removal.
Rubber O-rings, due to their operation under high-temperature, high-pressure, and highly corrosive conditions, are recommended for replacement to ensure sealing integrity.
| Part Number | Description | Quantity |
|---|---|---|
| 1529988-00-A | O-ring on the drain pipe | 1 |
| 1020296-00-B | Half shaft nut gasket | 1 |
| 1033093-00-A | Washer that attaches the front lower control arm to the knuckle | 1 |
| 1041687-00-C | Inverter three-phase cover warning label | 1 |
| 6008307 | Inverter three-phase cover sticker | 1 |
| 1055365-00-B | Washer that attaches the left motor bracket to the body | 2 |
| 1529977-00-A | O-ring on the suction/fluid fitting | 1 |