20/04/2020 15:28:55

Link - Stabilizer Bar - Front - LH (Remove and Replace)

Correction Code 31012002

Warning IconA warning icon, calling your attention to a possibly risky situation
Warning
If the vehicle has air suspension, activate "Jack" mode on the touchscreen before raising and supporting the vehicle.

Removal

  1. Loosen the front LH lug nuts (torque 175 Nm).
  2. Raise and support the vehicle (refer to procedure).
  3. Remove the road wheel (refer to procedure).
  4. Dual Motor vehicles: Remove the brake dust shield (refer to procedure).
  5. Remove and discard the nut that secures the link to the knuckle (torque 70 Nm).
    Warning IconA warning icon, calling your attention to a possibly risky situation
    CAUTION
    To prevent ball joint damage, always hold the ball joint pin with a wrench while loosening or tightening the lock nut.
  6. Remove and discard the nut that secures the link to the stabilizer bar (torque 70 Nm).
    Warning IconA warning icon, calling your attention to a possibly risky situation
    CAUTION
    To prevent ball joint damage, always hold the ball joint pin with a wrench while loosening or tightening the lock nut.
  7. Remove the stabilizer bar link from the vehicle.

Installation

  1. Installation procedure is the reverse of removal.
    Warning IconA warning icon, calling your attention to a possibly risky situation
    CAUTION
    Replace all nylon-insert locknuts.