2020-03-02

Frame - Seat Base - 2nd Row - Executive (Remove and Replace)

Correction Code 13021002

Removal

  1. Remove the 2nd row back rest assembly(refer to procedure).
  2. Dual Motor vehicles only: Release the fasteners (x4) that secure the inline fuse bracket to the seat frame (torque 5 Nm).
  3. On each side of the vehicle, release the outboard bolt that secures the frame to the body (torque 26 Nm).
  4. On each side of the vehicle, release the inboard bolt that secures the frame to the body (torque 26 Nm).
  5. On each side of the vehicle, release the edge clip that secures the HV cables to the frame.
  6. On the LH side of the vehicle, disconnect the low voltage harness.
  7. Remove the frame from the vehicle.

Installation

Installation procedure is the reverse of removal.