29/11/2022 18:30:51
Sensor - Pressure and Temperature - Low Pressure (Remove and Replace)
Correction Code 18205602
Removal
- Recover refrigerant from the vehicle. See A/C Refrigerant Recovery and Recharge (Remove and Replace).
- Remove the underhood storage unit (refer to procedure).
- Disconnect the electrical connector from the low pressure pressure and temperature sensor.
-
Use a wrench to remove the low pressure pressure and temperature sensor from the A/C pipe (torque 8 Nm).
CAUTIONTo prevent damage always use a suitable wrench to hold the backing nut when loosening pipes and unions.CAUTIONPlug pipe connections to prevent ingress of moisture or dirt.
- Remove the low pressure pressure and temperature sensor from the vehicle.
Installation
- Recharge the refrigerant. See A/C Refrigerant Recovery and Recharge (Remove and Replace).