02/03/2020 13:50:14

Sensor - Ambient Air Temperature - Compressor (Remove and Replace)

Correction Code 31102102

Removal

  1. Remove underhood storage unit for access (refer to procedure)
  2. Position hoses aside for access.
  3. Remove screw securing compressor ambient air temperature sensor (torque 2.5 Nm).
  4. Disconnect sensor harness lead.
  5. Rotate harness connector and release from bracket.
  6. Remove sensor.

Installation

  1. Installation procedure is the reverse of removal.
    Informational PurposesAn informational icon, calling your attention
    Note
    Clean the affected areas before installation.
    Warning IconA warning icon, calling your attention to a possibly risky situation
    CAUTION
    Replace all patchbolt(s).