02/03/2020 13:50:14

Sensor - Level - Windshield Washer Reservoir (Remove and Replace)

Correction Code 17501902

Removal

  1. Remove the front LH upper wheel arch liner (refer to procedure).
  2. Position a container to collect any spillage.
  3. Disconnect the level sensor connector.
  4. Remove the level sensor from the washer reservoir.
    Informational PurposesAn informational icon, calling your attention
    Note
    Inspect the O-ring for damage and replace if necessary.

Installation

  1. Installation procedure is the reverse of removal.