02/03/2020 13:50:14

Seal - Door - Front - A Pillar - Margin - LH (Remove and Replace)

Correction Code 11700702

Removal

  1. Open vehicle door, ensuring good access.
  2. Carefully release clip (x1) securing top of flap seal to door.
    Warning IconA warning icon, calling your attention to a possibly risky situation
    CAUTION
    Take care not to damage component(s).
    Informational PurposesAn informational icon, calling your attention
    Note
    Components have been removed in this graphic to aid clarity.
    Warning IconA warning icon, calling your attention to a possibly risky situation
    CAUTION
    Protect exterior paint surfaces during this procedure.
  3. Carefully release clips (x2) securing lower end of flap seal to door.
  4. Release remaining seal to front edge of door.
  5. Remove door seal.

Installation

  1. Installation procedure is the reverse of removal.
    Informational PurposesAn informational icon, calling your attention
    Note
    Clean the affected areas before installation.