02/03/2020 13:50:14

Frame - Seat Base - 2nd Row Cushion (Remove and Replace)

Correction Code 13051702

Special tool recommended for this procedure:

Part Number Description
1085932-00-A Rear Seat Access Tool

Removal

  1. Remove the seat cushion (refer to procedure).
  2. Remove the LH rear seat back rest assembly(refer to procedure).
  3. Remove the RH rear seat back rest assembly(refer to procedure).
  4. If the vehicle is equipped with the Subzero Weather package, disconnect the 2 seat heater harness connections on the LH side of the vehicle and the 1 seat heater harness connection on the RH side of the vehicle.
  5. Dual Motor vehicles only: Release the fasteners (x4) that secure the inline fuse bracket to the seat frame (torque 5 Nm).
  6. Remove the bolts (x8) that secure the seat frame to the body (torque 26 Nm).
    Tip: If the seat frame is being removed for access, it might not be necessary to remove it from the vehicle. Instead, lift up on the frame and temporarily secure it to the 2nd row seat backrest.
  7. Remove all clips that secure cables to the 2nd row seat frame. Ensure that all cables are reattached to the seat frame upon reinstallation.
    Warning IconA warning icon, calling your attention to a possibly risky situation
    CAUTION
    Do not damage any cables.
    Warning IconA warning icon, calling your attention to a possibly risky situation
    CAUTION
    Protect the surrounding interior trim before removing the 2nd row seat frame in the next step.
    Warning IconA warning icon, calling your attention to a possibly risky situation
    CAUTION
    When removing the 2nd row seat frame in the next step, do not permit the seat belt buckles to catch on the HV cables.
  8. Lift up on the front end of the frame to release it from the body.
    Warning IconA warning icon, calling your attention to a possibly risky situation
    CAUTION
    Do not allow the seat belt buckles to catch on the HV cables.
    Warning IconA warning icon, calling your attention to a possibly risky situation
    CAUTION
    Do not damage any of the surrounding trim.
  9. Remove the seat frame from the vehicle.

Installation

  1. Installation procedure is the reverse of removal.
    Warning IconA warning icon, calling your attention to a possibly risky situation
    CAUTION
    Ensure that all clips are correctly reattached to the frame.
    Warning IconA warning icon, calling your attention to a possibly risky situation
    CAUTION
    Replace all patchbolt(s).