02/03/2020 13:50:14

Latch - Liftgate (Remove and Replace)

Correction Code 11355002

Removal

  1. Open liftgate and secure at working height.
  2. Remove liftgate trim (refer to procedure)
  3. Disconnect wiring harness connector.
  4. Remove screws (x2) securing liftgate latch assembly (torque 10 Nm).
  5. Release outer cable from abutment and disconnect inner cable from latch assembly.
  6. Remove latch assembly.

Installation

  1. Installation procedure is the reverse of removal, except for the following.
    Warning IconA warning icon, calling your attention to a possibly risky situation
    CAUTION
    Replace all patchbolt(s).
  2. Power the cinch motor until the correct alignment is reached. Open liftgate and torque tighten bolts.