02/03/2020 13:50:14

Trim - A-Pillar - LH (Remove and Install)

Correction Code 15184001

Removal

  1. Remove the A-Pillar middle trim panels (refer to procedure)
  2. Release 'A' post trim retaining screw cover, lower edge first.
  3. Remove screw (x1) securing trim to 'A' post (torque 2 Nm).
  4. Carefully release clip (x1) securing trim to 'A' Post
  5. Clear location peg and lift to release lower locating lugs.
  6. Release trim from body.
  7. Disconnect tweeter harness connector and remove 'A' post trim.

Installation

  1. Installation procedure is the reverse of removal, except for the following:
  2. Ensure both lower lugs are located and upper peg aligns to body before driving clip fully home.