02/03/2020 13:50:14

Duct - HEPA Filter - Inlet (Remove and Replace)

Correction Code 18105002

Removal

  1. Remove the rear underhood apron (refer to procedure).
  2. Remove the front underhood apron (refer to procedure).
  3. On each side of the HEPA filter, release the drain hose.
    LH Side RH side
  4. Release the clips (x3) that secure the HEPA filter inlet duct to the cowl screen. Remove the inlet duct from the vehicle.

Installation

Installation procedure is the reverse of removal, except for the following:
Warning IconA warning icon, calling your attention to a possibly risky situation
CAUTION
Replace any broken clips.