02/03/2020 13:50:14
Switches - Steering Wheel (Remove and Replace)
Correction Code 17300502
Removal
- Remove the driver's air bag (refer to procedure).
- Place the driver's air bag assembly on a soft clean surface with the backside of the bezel facing up.
-
Unplug the harness connectors (x2) from the back of 1 of the switches.
-
Remove the fasteners (x2) that secure the switch to the air bag assembly (torque
1.2 Nm).
-
Disengage the switch retaining clips by carefully pushing the switch up through
the back of the bezel.
CAUTIONTake care not to damage component(s).
-
Remove the switch from the bezel.
- Repeat steps 3 through 6 on the other steering wheel switch.
Installation
- Installation procedure is the reverse of removal.