08/12/2022 07:58:30
Module - Sunroof Controller (RHD) (Remove and Replace)
Correction Code 17151902
Warning
If the 12V power
supply is disconnected, do not attempt to open any doors with door glass in
closed position. Failure to follow this instruction could result in door glass
shatter.
Note
Before
disconnecting the 12V power supply, ensure that the driver’s door window is
fully open. Failure to follow this instruction could result in vehicle
lockout.
Removal
- Move the LH seat to its rearmost position.
- Remove the LH footwell cover (refer to procedure).
-
Carefully peel back the front LH carpet for access.
CAUTIONTake care not to damage component(s).
- Remove the bolts (x3) that secure the LH footwell harness cover (torque 4 Nm).
- Disconnect 12V power. See Disconnect 12V Power .
-
Remove the bolts (x3) that
attach the controller to the bulkhead (torque 4 Nm).
-
Disconnect the sunroof
controller harness connectors (x2).
- Remove the controller from the vehicle.
Installation
Installation procedure is the reverse of removal, except for the following:
- Reinstall the latest vehicle firmware, or update the firmware if not the latest. See Firmware Reinstall - Touchscreen or Firmware Update.
- For vehicles with a Panoramic Sunroof: Perform the Panoramic Sunroof Calibration. See Panoramic Roof - Calibrate.