02/03/2020 13:50:14

Motor - Sunroof - RH (Remove and Replace)

Correction Code 24103102

Removal

  1. Remove glove box assembly (refer to procedure)
  2. Disconnect sunroof motor harness connector.
  3. Remove screws (x3) securing sunroof motor to 'A' post (torque 5 Nm).
  4. Release sunroof motor assembly and disconnect module from drive tube.
  5. Remove sunroof motor module.

Installation

Installation procedure is the reverse of removal, except for the following:
  1. Perform a panoramic roof calibration (refer to procedure).