20/04/2020 15:28:14

Drop Link - Stabilizer Bar - Rear - LH (Remove and Replace)

Correction Code 31033402

Removal

  1. Remove the road wheel (refer to procedure).
  2. Remove the nut that secures the stabilizer bar drop link to the lower control arm (torque 70 Nm).
    Warning IconA warning icon, calling your attention to a possibly risky situation
    CAUTION
    To prevent ball joint damage, always hold the ball joint pin with a wrench while loosening or tightening the lock nut.
  3. Remove the nut that secures the stabilizer bar drop link to the stabilizer bar (torque 70 Nm).
  4. Release the drop link from the stabilizer bar and the lower control arm, then remove the drop link.

Installation

  1. Installation procedure is the reverse of removal.
    Informational PurposesAn informational icon, calling your attention
    Note
    Clean the affected areas before installation.
    Warning IconA warning icon, calling your attention to a possibly risky situation
    CAUTION
    Replace all nylon-insert locknuts.