2024-12-19

Sensor - Pressure and Temperature - High Pressure (Remove and Replace)

Correction Code 18205502

  • 2024-12-19: Added Note on separately adding correction code 18200102.
Informational PurposesAn informational icon, calling your attention
Note
This procedure requires the A/C Refrigerant (Recovery and Recharge) procedure to be performed. If not already automatically added to the Service Visit, add correction code 18200102 as a separate activity to the Service Visit.

Removal

  1. Recover refrigerant from the vehicle. See A/C Refrigerant Recovery and Recharge (Remove and Replace).
  2. Remove the front LH lower wheel arch liner (refer to procedure).
  3. Disconnect the electrical connector from the high pressure pressure and temperature sensor.
  4. Use a wrench to remove the high pressure pressure and temperature sensor from the A/C pipe (torque 8 Nm).
    Warning IconA warning icon, calling your attention to a possibly risky situation
    CAUTION
    To prevent damage always use a suitable wrench to hold the backing nut when loosening pipes and unions.
    Warning IconA warning icon, calling your attention to a possibly risky situation
    CAUTION
    Plug pipe connections to prevent ingress of moisture or dirt.
  5. Remove the high pressure and temperature sensor from the vehicle.