2026-08-05

Hinge - Door - Front - Lower - LH (Remove and Replace)

Correction code 11336601 11336602 11336701 11336702 NOTE: Unless otherwise explicitly stated in the procedure, the correction code and FRT listed above reflect all of the work required to perform this procedure, including the linked procedures. Do not stack correction codes unless explicitly told to do so. NOTE: See Flat Rate Times to learn more about FRTs and how they are created. NOTE: See Personal Protection to make sure you are wearing proper PPE when performing the procedure below. NOTE: See Ergonomic Precautions for safe and healthy working practices.

Warning IconA warning icon, calling your attention to a possibly risky situation
Warning
This procedure is a DRAFT. Although it has been validated, Warnings and Cautions might be missing. Follow safety requirements and use extreme caution when working on or near High Voltage systems and components.
  • 2026-08-03: Released new procedure.

Remove

  1. Open LH front door
  2. Lower LH front window
  3. Support LH front door with floor jack
    Informational PurposesAn informational icon, calling your attention
    Note
    Protect painted surface with soft object
  4. Apply tape around perimeter of the hinge
    Informational PurposesAn informational icon, calling your attention
    Note
    This will help with alignment during installation
  5. Remove LH front door lower hinge bolts from door assembly
    Informational PurposesAn informational icon, calling your attention
    Note
    2x bolts, 13mm, 31 Nm
  6. Remove LH front door lower hinge bolts from body
    Informational PurposesAn informational icon, calling your attention
    Note
    2x bolts, 13mm, 52 Nm
  7. Remove LH front lower door hinge
    Informational PurposesAn informational icon, calling your attention
    Note
    May need to raise door support to create a gap between door and body to remove

Install

  1. Position LH front lower door hinge
    Informational PurposesAn informational icon, calling your attention
    Note
    Align LH front lower door hinge to original position
  2. Install LH front door lower hinge bolts to body
    Informational PurposesAn informational icon, calling your attention
    Note
    2x bolts, 13mm, 52 Nm, Partially close door to install bolts
  3. Install LH front door lower hinge bolts to door assembly
    Informational PurposesAn informational icon, calling your attention
    Note
    2x bolts, 13mm, 31 Nm
  4. Remove floor jack from LH front door
  5. Check gap and flush of front door to surrounding components
    Informational PurposesAn informational icon, calling your attention
    Note
    See
  6. Clean body side lower hinge bolts with IPA
    Informational PurposesAn informational icon, calling your attention
    Note
    Allow 1 minute for IPA to dry
  7. Apply touch up paint to body side lower hinge bolts
    Informational PurposesAn informational icon, calling your attention
    Note
    2x bolts, make sure to shake touch up paint before applying
  8. Remove tape around perimeter of hinge
  9. Raise LH front window
  10. Close LH front door