02/03/2020 13:50:14
Striker - Seat back - 2nd Row Seat - LH (Remove and Replace)
Correction Code 13056302
Removal
- Remove rear trunk side trim (refer to procedure)
- Remove rear sill trim panel (refer to procedure)
-
Remove screws (x2) securing striker to body (torque 17 Nm).
- Remove striker.
Installation
- Install the new striker and tighten the outboard screw. Only partially tighten the inboard screw.
- Compare the striker to the seat back and adjust striker height.
- Tighten both screws to full torque (torque 17 Nm). Confirm fit against seat back.
- Reinstall rear sill trim panel.
- Reinstall rear trunk side trim.