02/03/2020 13:50:14
Brake Pedal (Remove and Replace)
Correction Code 33251002
Removal
-
Remove the brake light switch (refer to procedure).
CAUTIONThe brake light switch is a one time use component. Ensure that a new switch is used during reinstallation.
- Remove the spring clip from the clevis pin.
- Depress the brake pedal for clearance and remove the clevis pin.
- Remove the nuts (x4) that secure the pedal to the brake booster assembly (torque 23 Nm).
-
Remove the bolts (x2) that secure
the brake pedal assembly to the brake pedal reinforcement panel (torque 23 Nm).
Remove the brake pedal from the vehicle.
Installation
Installation procedure is the reverse of removal, except for the following:
CAUTION
Replace all nylon-insert
locknuts.
Verify the correct operation of the brake lights.