02/03/2020 13:50:14
Antenna Amplifier - FM2/Satellite/DAB (Remove and Replace)
Correction Code 21300702
Removal
- Remove the RH liftgate trim (refer to procedure).
- Remove the screw that secures the amplifier to the liftgate (torque 1.2 Nm).
-
Carefully disconnect the amplifier connector.
NoteThe second connector is for EU markets only.
-
Release the clip that secures the amplifier to the liftgate.
-
Carefully release the antenna lead from the liftgate glass and then remove the
antenna.
Installation
Installation procedure is the reverse of removal, except for the following:
-
Replace the adhesive strip if necessary.
NoteClean the affected areas before installation.CAUTIONApply contact adhesive to mating faces if bond has been broken.
-
Ensure all contacts are clean and bond to the surface mounted antenna.
NoteListen for an audible click when connecting harness connectors.