2023-11-16

LED - Door - Exterior Handle - Rear - LH (Remove and Replace)

Correction Code 11454702

  • 2023-11-16: Added images that show LED harness routing on Gen 2 and newer door handle assemblies.

Removal

  1. Remove the backplate from the exterior door release handle assembly (refer to procedure).
  2. Disconnect the handle grip LED harness connector from the inside of the assembly.
  3. Remove the LED from the handle grip.

Installation

Installation procedure is the reverse of removal.

Informational PurposesAn informational icon, calling your attention
Note
Gen 2 and newer door handle assemblies: See images below for LED harness routing.