08/02/2023 14:51:49

Reservoir - Air Suspension (Remove and Replace)

Correction Code 31102502

Removal

  1. Raise and support the vehicle on a 2 post lift. See Raise Vehicle - 2 Post Lift.
  2. Depressurize the air reservoir. See Air Suspension - Pressurize/Depressurize - Full System.
  3. Remove underhood storage unit. See Underhood Storage Unit (Remove and Install).
  4. Disconnect 12V power. See Disconnect 12V Power.
  5. Remove the air line.
    • For vehicles manufactured before November 2013: Release the air line on the reservoir side of the fill valve.
    • For vehicles manufactured November 2013 and later: Unscrew the main air line connector from the reservoir (torque 5 Nm).
    Warning IconA warning icon, calling your attention to a possibly risky situation
    CAUTION
    Plug pipe connections to prevent ingress of moisture or dirt.
  6. Support the reservoir and remove the retaining screws (x2) on the mounting straps.
    • For vehicles manufactured before November 2013:
    • For vehicles manufactured November 2013 and later:
  7. Remove the reservoir.