12/08/2021 22:01:22

Sensor - Occupant Classification System - 1st Row - RH (Remove and Replace)

Correction Code 20202212

Removal

Informational PurposesAn informational icon, calling your attention
Note
This component cannot be serviced individually. To service this component, perform the following:
  1. Remove the driver seat foam (refer to procedure).
  2. Remove OCS sensor mat from FSC vent heat pad.
    Informational PurposesAn informational icon, calling your attention
    Note
    Be cautious when removing to avoid damage to head pad.

Installation

  1. Install OCS sensor mat to FSC vent heat pad.
  2. Install the driver seat foam (refer to procedure)