2026-08-09

Antenna - Satellite Radio - Liftgate-Mounted (Remove and Replace)

Correction Code 21310102

Note
This procedure is for vehicles built before December 23, 2014. On newer vehicles, the satellite radio antenna is located under the panoramic roof fixed glass (refer to procedure).

Removal

  1. Remove the liftgate glass (refer to procedure).
  2. Disconnect the XM antenna connector.
  3. Release the XM antenna from the adhesive bond.
  4. Release the wiring harness from the liftgate.
    Note
    Note installed position of components before removal.
  5. Remove the XM antenna.

Installation

  1. Installation procedure is the reverse of removal.
    Note
    Clean the affected areas before installation.
    CAUTION
    Apply contact adhesive to mating faces if bond has been broken.
    Warning
    Only use cleaning agents and solvents in a well-ventilated area.