Rear View Mirror - 2nd Generation (Remove and Replace)
Correction Code 15050502
Note
This procedure describes how to remove and replace the 2nd generation rear view
mirror. If the vehicle is equipped with a 1st generation rear view mirror, refer to
procedure 15050202 (refer to procedure).
Removal
Remove the front cover by pulling straight down to release the clips.
Disconnect the rear view electrical connector.
Release the rearview mirror by turning it clockwise until it pulls
free.
Remove the mirror.
Installation
Installation procedure is the reverse of removal, except for the following:
Ensure that the harnesses are routed parallel to the mirror arm. and do not bunch
together inside the glare shield.
