2020-08-12

Module - Electric Park Brake - EPB (Remove and Replace)

Correction Code 33050102

Removal

  1. Remove the RH side trunk trim (refer to procedure).
  2. Disconnect the harness connectors (x2) from the electric park brake (EPB) module.
  3. Disconnect the harness connections (x2) from the liftgate control module.
  4. Remove the nuts (x4) that attach the bracket to the wheelhouse studs (torque 3 Nm).
  5. Remove the bracket and modules assembly.
  6. Remove the nuts and bolts (x3) that attach the modules to the bracket (torque 2 Nm).
    Warning IconA warning icon, calling your attention to a possibly risky situation
    CAUTION
    Replace all patchbolt(s).
  7. Remove the EPB module from the bracket.

Installation

Installation procedure is the reverse of removal, except for the following: