02/03/2020 13:50:14

Hinge - Hood - LH (Remove and Replace)

Correction Code 11330302

Removal

  1. Remove the hood assembly. See Hood Assembly (Remove and Install) .
  2. Mark the installed position of the hinge to the hood.
  3. Remove the nuts (x2 or x3) that secure the LH hinge to the hood (torque 24 Nm).
    Warning IconA warning icon, calling your attention to a possibly risky situation
    CAUTION
    Protect exterior paint work from possible damage during this procedure.
  4. Remove LH hood hinge.

Installation

Installation procedure is the reverse of removal, except for the following:
Informational PurposesAn informational icon, calling your attention
Note
Clean the affected areas before installation.
Warning IconA warning icon, calling your attention to a possibly risky situation
CAUTION
Replace all nylon-insert locknuts.
  • Install the hood hinge to the previously marked position.