19/12/2024 05:03:07

Pipe - High Pressure - Gas Cool to Sub-Cool Condenser (Remove and Replace)

Correction Code 18204402

  • 2024-12-19: Added Note on separately adding correction code 18200102.
Informational PurposesAn informational icon, calling your attention
Note
This procedure requires the A/C Refrigerant (Recovery and Recharge) procedure to be performed. If not already automatically added to the Service Visit, add correction code 18200102 as a separate activity to the Service Visit.

Removal

  1. Recover refrigerant from the vehicle(refer to procedure)
  2. Remove front aero shield panel (refer to procedure)
  3. Remove nuts (x2) securing inboard air conditioning link pipe to gas cool and sub-cool condenser's (torque 8 Nm).
  4. Remove underhood storage unit for access (refer to procedure)
  5. Remove bolt securing inboard air conditioning link pipe to carrier (torque 11 Nm).
  6. Maneuver and remove pipe.
    Warning IconA warning icon, calling your attention to a possibly risky situation
    CAUTION
    Remove and discard O-rings.

Installation

  1. Installation procedure is the reverse of removal, except for the following:
  2. Replace A/C pipe O-rings.
    Warning IconA warning icon, calling your attention to a possibly risky situation
    CAUTION
    Lubricate new O-rings with clean refrigerant oil.