2020-03-02

Louver - Wheel Arch Liner - Front - LH (Remove and Replace)

Correction Code 12011302

Warning IconA warning icon, calling your attention to a possibly risky situation
Warning
If the vehicle has air suspension, activate "Jack" mode on the touchscreen before raising and supporting the vehicle.

Removal

  1. Raise and support the vehicle (refer to procedure)
    Warning IconA warning icon, calling your attention to a possibly risky situation
    Warning
    Do not work on an incorrectly supported vehicle.
  2. Remove road wheel (refer to procedure)
  3. Remove bolts (x2), plastic rivet (x1) securing wheel arch liner to undershield and front diffuser panel (torque 3 Nm).
  4. Remove plastic rivets (x8) securing wheel arch liner to fascia, front diffuser panel and upper wheel arch liner.
    Informational PurposesAn informational icon, calling your attention
    Note
    Note installed position of components before removal.
    Informational PurposesAn informational icon, calling your attention
    Note
    Dual Motor vehicles do not have the 4 outboard rivets. The outboard section of the arch liner is secured by 3 trim clips.
  5. Remove plastic rivets (x4), nut (x1) securing lower wheel arch liner to upper wheel arch liner and chassis (torque 3 Nm).
    Informational PurposesAn informational icon, calling your attention
    Note
    Note installed position of components before removal.
  6. Remove wheel arch liner.

Installation

  1. Installation procedure is the reverse of removal.