02/03/2020 13:50:14

Seal - Door - Front - LH (Remove and Replace)

Correction Code 11701102

Removal

  1. Remove door trim (refer to procedure)
  2. Release clips (x4) securing flap seal ends front and rear.
    Informational PurposesAn informational icon, calling your attention
    Note
    Components have been removed in this graphic to aid clarity.
    Warning IconA warning icon, calling your attention to a possibly risky situation
    CAUTION
    Take care not to damage component(s).
  3. Carefully release remaining clips (x19).
  4. Remove door seal.

Installation

  1. Installation procedure is the reverse of removal.
    Informational PurposesAn informational icon, calling your attention
    Note
    Clean the affected areas before installation.