02/03/2020 13:50:14

Trim - Sill Panel - LH (Remove and Replace)

Correction Code 15180102

Removal

  1. Remove the LH middle 'A' pillar trim panel (refer to procedure).
  2. Use a trim tool to release the 2nd clip from the rear.
    Warning IconA warning icon, calling your attention to a possibly risky situation
    CAUTION
    To avoid damaging the sill panel, do not attempt to pry it up from the rear before releasing this clip.
  3. Release the remaining clips.
    Informational PurposesAn informational icon, calling your attention
    Note
    The number of clips varies depending on the build date of the vehicle.
  4. Remove the trim panel.

Installation

Installation procedure is the reverse of removal, except for the following:
  • Replace all broken trim clips except for the clip on the tower.
  • When reinstalling the RH sill trim panel, position the front of the trim panel between the footwell cover and the A-pillar, then twist the trim panel to secure the bottom and rear trim clips.
    Warning IconA warning icon, calling your attention to a possibly risky situation
    CAUTION
    Do not damage any harness connections.