02/03/2020 13:50:14

Module - Intrusion Sensor (Remove and Replace)

Correction Code 17153002

Removal

  1. Use a trim tool to release the clips (x2) that attach the rear of the overhead console, and then pull the rear of the overhead console down.
    Informational PurposesAn informational icon, calling your attention
    Note
    Make sure not to damage the harness connections inside of the headliner.
  2. Disconnect the headliner electrical harness from the microphone connectors (x2) and the intrusion sensor connector, and then remove the overhead console with the intrusion sensor module from the vehicle.

Installation

Installation procedure is the reverse of removal.