02/03/2020 13:50:14
Reservoir - Master Cylinder (Remove and Replace)
Correction Code 33170802
Removal
- Remove the master cylinder and reservoir assembly (refer to procedure).
- Release the reservoir to master cylinder fixing lugs (x4).
-
Release the reservoir from the master cylinder connections (x2).
NotePlace suitable absorbent material around the affected area to absorb any possible fluid spillage.
-
Remove and discard the seals (x2) from the master cylinder.
CAUTIONReplace the master cylinder seals.
Installation
Installation procedure is the reverse of removal, except for the following:
Warning
Only use cleaning agents and solvents
in a well-ventilated area.
Note
Clean the affected areas before
installation.
- Bleed the brakes (refer to procedure).