28/08/2020 14:09:47
Module - Thermal Controller (Remove and Replace)
Correction Code 18100802
Removal
- Remove the MCU (refer to procedure).
- Remove the screws that secure the thermal controller to the HVAC unit.
-
Disconnect the wiring harness connectors.
CAUTIONTake care not to damage component(s).
-
Remove the thermal controller.
Installation
Installation procedure is the reverse of removal, except for the following:
- Reinstall the latest vehicle firmware, or update the firmware if not the latest. See Firmware Reinstall - Touchscreen or Firmware Update.