2026-08-09

Exterior Release Switch - Liftgate (Remove and Replace)

Correction Code 11357002

Removal

  1. Open the liftgate to a suitable working height.
  2. Remove the applique from the liftgate (refer to procedure).
    CAUTION
    Take care not to damage component(s).
    CAUTION
    Protect paintwork from possible damage during this procedure.
  3. Remove the bolts (x2) that secure the switch housing to the liftgate (torque 3 Nm).
    CAUTION
    Replace all patchbolt(s).
  4. Release the switch and housing from the liftgate, then rotate and disconnect the harness connector.
  5. Remove the screws (x2) that secure the liftgate switch to the housing and remove the switch.

Installation

  1. Installation procedure is the reverse of removal.