2024-12-19

Pipe - High Pressure - Sub-Cool Condenser to Chiller (Remove and Replace)

Correction Code 18204002

  • 2024-12-19: Added Note on separately adding correction code 18200102.
Informational PurposesAn informational icon, calling your attention
Note
This procedure requires the A/C Refrigerant (Recovery and Recharge) procedure to be performed. If not already automatically added to the Service Visit, add correction code 18200102 as a separate activity to the Service Visit.

Removal

  1. Recover refrigerant from the vehicle. See A/C Refrigerant Recovery and Recharge (Remove and Replace).
  2. Remove front skid plate (refer to procedure)
  3. Remove nut (x1) securing pipe to sub-cool condenser (torque 8 Nm).
  4. Remove nut (x1) securing pipe retaining plate to TXV (torque 12 Nm).
  5. Disconnect refrigerant pipes from TXV.
    Warning IconA warning icon, calling your attention to a possibly risky situation
    CAUTION
    Plug pipe connections to prevent ingress of moisture or dirt.
    Warning IconA warning icon, calling your attention to a possibly risky situation
    CAUTION
    Remove and discard O-rings.
  6. Remove underhood storage unit for access (refer to procedure)
  7. Remove bolt securing sub-cool condenser / chiller high pressure pipe at union to high pressure charge port pipe (torque 8 Nm).
    Warning IconA warning icon, calling your attention to a possibly risky situation
    CAUTION
    Plug pipe connections to prevent ingress of moisture or dirt.
    Warning IconA warning icon, calling your attention to a possibly risky situation
    CAUTION
    Remove and discard O-rings.
  8. Maneuver and remove pipe.