02/03/2020 13:50:14

Headliner (Remove and Install)

Correction Code 15201001

Informational PurposesAn informational icon, calling your attention
Note
This procedure does not remove headliner from vehicle, the headliner remains captive within the body.

Removal

  1. Remove LH 'A' post trim (refer to procedure)
  2. Remove RH 'A' post trim.
  3. Release the LH upper 'B' post trim (refer to procedure).
  4. Release the RH upper 'B' post trim.
  5. Remove LH 'C' post trim (refer to procedure)
  6. Remove RH 'C' post trim.
  7. Remove driver sun visor (refer to procedure)
  8. Remove passenger sun visor.
  9. Remove rear view mirror (refer to procedure)
  10. Carefully release clips (x4) securing headliner center trim to cross rail.
    Warning IconA warning icon, calling your attention to a possibly risky situation
    CAUTION
    Take care not to damage component(s).
    Warning IconA warning icon, calling your attention to a possibly risky situation
    CAUTION
    Replace any broken clips.
  11. Release spigots (x3) and remove center headliner trim.
  12. Carefully release clips (x9) securing headliner to front header.
    Informational PurposesAn informational icon, calling your attention
    Note
    Components have been removed in this graphic to aid clarity.
  13. Disconnect harness connectors (x5) from overhead console.
  14. Working front to back, release wiring harness from headliner and clips (x3).
  15. Release rear header clips (x3) and remaining cantrail clips (x6).
  16. Disconnect harness connectors from both rear map lights.
  17. Release wiring harness from rear headliner clips (x2).
  18. Position wiring harness aside for access.
  19. Cover and support headliner.

Installation

  1. Installation procedure is the reverse of removal.
    Informational PurposesAn informational icon, calling your attention
    Note
    The windshield must be removed for access, if headliner is being replaced.