19/01/2023 12:04:37
Module - Condenser Fan Control - LH (Remove and Replace)
Correction Code 18202202
Warning
If the vehicle has air
suspension, activate "Jack" mode on the touchscreen before raising and
supporting the vehicle.
Removal
- Raise and support the vehicle. See Raise Vehicle - 2 Post Lift.
- Remove the LH front lower wheel arch liner. See Louver - Wheel Arch Liner - Front - LH (Remove and Replace) .
- Disconnect the harness connectors (x2) from the LH fan control module.
-
Remove the nuts (x2) securing the
LH fan control module to the chassis rail (torque 8 Nm).
- Remove the LH fan control module.
Installation
- After installation is complete, run the Thermal System test. See Cooling System - Thermal Test.