02/03/2020 13:50:14
Reservoir - Windshield Washer (Remove and Replace)
Correction Code 17501102
Removal
- Remove the rear center underhood apron (refer to procedure).
-
Remove the plastic rivet that secures the reservoir neck to the suspension shock
tower.
- Remove the washer pump from the reservoir (refer to procedure).
- Remove the reservoir level sensor (refer to procedure).
- Release the washer jet feed tube from the reservoir.
-
Release the clips (x2) that secure the harness to the reservoir.
-
Remove the fasteners (x3) that secure the reservoir to the body of the vehicle (torque 5 Nm).
-
Remove the reservoir from the vehicle by maneuvering it through the wheel
well.
Installation
Installation procedure is the reverse of removal.