04/04/2022 03:05:08

Harness - Adaptive Air Spring Module - Front - LH (Remove and Replace)

Correction Code 31100012

Removal

  1. Open the LH front door and lower the window.
  2. Support the vehicle on a 2-post lift, but do not raise it at this time. SeeRaise Vehicle - 2 Post Lift.
  3. Enable Jack Mode. SeeJack Mode Activation.
  4. Remove the LH front wheel.
  5. Remove the nut (x1), bolts (x3) and clips (x2) that attach the front portion of the LH wheel arch liner to the body, and then fold back the front portion of the wheel arch liner. See Wheel Arch Liner - Front - LH (Remove and Replace).
  6. Release the grommet that attaches the LH adaptive air spring module harness from the harness bracket.
  7. Disconnect the LH adaptive air spring module harness connector.
  8. Remove the rear center underhood apron. See.
  9. Disconnect the LH damper harness connectors (x2) from the LH front adaptive air spring module.
  10. Release the LH adaptive air spring module harness from the bracket.
  11. Remove the adaptive air spring module harness from the vehicle.

Installation

Installation procedure is the reverse of removal.