02/03/2020 13:50:14
Bash Plate - Front - Stamping (Remove and Replace)
Correction Code 30011302
Removal
- Remove the front aero shield panel (refer to procedure).
- Remove the bash plate extrusion (refer to procedure).
-
Remove and discard the bolts (x2), shoulder washers (x2), and washers (x2)
that secure the bash plate stamping to the front subframe skid plate (9
Nm).
- Remove the bash plate stamping.
Installation
-
Installation procedure is the reverse of removal.
NoteUse new hardware to install the bash plate stamping. Do not reuse any hardware.