02/03/2020 13:50:14

Center Console Assembly (Remove and Replace)

Correction Code 15192402

Removal

  1. Remove the drop in center console assembly, if installed (refer to procedure).
  2. Remove the under-screen cubby.
  3. Remove the LH center console closeout extension (refer to procedure).
  4. Remove the RH center console closeout extension.
  5. Move the driver's seat fully forward.
  6. Remove the rear center console trim (refer to procedure).
  7. Remove the fasteners (x2) that secure the rear end of the center console chassis to the body (torque 10 Nm).
  8. Working in the footwell areas, remove the bolt that secures each side of the center console to the instrument panel carrier (torque 2.5 Nm).
  9. Release the clips (x4) that secure the center console base closing trim.
    Warning IconA warning icon, calling your attention to a possibly risky situation
    CAUTION
    Take care not to damage component(s).
    Warning IconA warning icon, calling your attention to a possibly risky situation
    CAUTION
    Replace any broken clips.
  10. Remove the center console base closing panel.
  11. Remove the bolts (x2) that secure the center console base to the body (torque 3 Nm).
  12. Remove the driver side footwell bolt that secures the center console to the dash. Repeat this step for the passenger footwell bolt.
  13. Release the fasteners (x2) that secure the console to the crosscar beam (torque 3 Nm), then release the center console from the adhesive pads (x6) and move rearward to access the console wiring harness.
  14. Release the fir tree clip that secures the 12V electrical connector to the center console.
  15. Disconnect the harness connectors (x4).
  16. Move the driver's seat fully rearward.
  17. Remove the center console from the vehicle.

Installation

  1. Installation procedure is the reverse of removal.