2026-04-30

Harness - Seat Cushion - 3rd Row Seat (7-Seat) ((拆卸和更换))

校正代码 1710080401 1710080402 FRT 0.24 注意：除非本程序中另有明确规定，否则上文所列校正代码和 FRT 反映的是执行本程序（包括关联程序）所需的所有工作。除非明确要求，否则请勿堆叠校正代码。 注意：请参阅平均维修工时深入了解 FRT 及其创建方式。 注意：请参阅人员保护确保在执行以下程序时穿戴适当的个人防护装备 (PPE)。 注意：请参阅人体工程学注意事项查看安全健康的作业规程。

拆卸

  1. Remove the 3rd row seat cushion. See Seat Cushion - 3rd Row (7-Seat) ((拆卸和更换)).
  2. Disconnect the LH side of the seat cushion harness connector.
  3. Remove the rear USB assembly. See Rear Usb (27W Usb-C + 27W Usb-C) ((拆卸和更换)).
  4. Disengage the retainers that attach the middle of the harness to the seat cushion assembly.
    Informational PurposesAn informational icon, calling your attention
    注
    2x retainers, 1x cloth retainer
  5. Disconnect the RH side of the connector and disengage the retainers (x4) that attach the rear side of the harness to the seat cushion assembly.
    Informational PurposesAn informational icon, calling your attention
    注
    After disconnecting the retainers, carefully remove harness from cushion by maneuvering around the retainers.

安装

  1. Connect the RH side of the connector, and then engage the retainers (x4) that attach the rear side of the harness to the seat cushion assembly.
  2. Re-engage the retainers that attach the middle of the harness to the seat cushion assembly.
    Informational PurposesAn informational icon, calling your attention
    注
    2x retainers, 1x cloth retainer
  3. Install the rear USB assembly. See Rear Usb (27W Usb-C + 27W Usb-C) ((拆卸和更换)).
  4. Reconnect the LH side of the seat cushion harness connector.
  5. Install the 3rd row seat cushion. See Seat Cushion - 3rd Row (7-Seat) ((拆卸和更换)).