2025-09-11

Mirror - Rear View (Remove and Replace)

Correction code 15050202 0.06 NOTE: Unless otherwise explicitly stated in the procedure, the above correction code and FRT reflect all of the work required to perform this procedure, including the linked procedures. Do not stack correction codes unless explicitly told to do so. NOTE: See Flat Rate Times to learn more about FRTs and how they are created. To provide feedback on FRT values, email ServiceManualFeedback@tesla.com. NOTE: See 개인 보호 to make sure wearing proper PPE when performing the below procedure. See 인체공학적 주의 사항 for safe and healthy working practices.

  • 2023-07-20: 탈거 부분의 단계 2에 비디오를 추가했습니다.

Remove

  1. 하단 쿼드 카메라 커버를 탈거합니다. 참조 항목: Quad Camera Cover - Lower (Remove and Replace).
  2. 리어 뷰 미러 레버를 잡은 다음, 시계 반대 방향으로 돌려 리어 뷰 미러를 분리합니다.
    Warning IconA warning icon, calling your attention to a possibly risky situation
    경고
    리어 뷰 미러 자체를 돌리지는 마십시오.
    Warning IconA warning icon, calling your attention to a possibly risky situation
    경고
    전기 하네스가 여전히 고정되어 있으므로 아직 미러를 완전히 탈거하지 마십시오.
    Warning IconA warning icon, calling your attention to a possibly risky situation
    경고
    The video(s) included in this procedure are meant as an overview for supplemental purposes only. Follow all of the steps listed in the procedure to avoid damage to components and/or personal injury.
  3. 리어 뷰 미러에서 전기 커넥터를 연결 해제한 다음, 차량에서 미러를 탈거합니다.

Install

  1. 전기 커넥터를 리어 뷰 미러에 연결합니다.
  2. 리어 뷰 미러 레버를 잡은 다음, 시계 방향으로 돌려 리어 뷰 미러를 장착합니다.
    Warning IconA warning icon, calling your attention to a possibly risky situation
    경고
    리어 뷰 미러 자체를 돌리지는 마십시오.
  3. 하단 쿼드 카메라 커버를 장착합니다. 참조 항목: Quad Camera Cover - Lower (Remove and Replace).