2019-08-13

Horn - High Tone (Remove and Replace)

Correction code 17530102 0.66 NOTE: Unless otherwise explicitly stated in the procedure, the above correction code and FRT reflect all of the work required to perform this procedure, including the linked procedures. Do not stack correction codes unless explicitly told to do so. NOTE: See Flat Rate Times to learn more about FRTs and how they are created. To provide feedback on FRT values, email ServiceManualFeedback@tesla.com. NOTE: See 개인 보호 to make sure wearing proper PPE when performing the below procedure. See 인체공학적 주의 사항 for safe and healthy working practices.

Remove

  1. 후면 후드 내 에이프런을 탈거합니다. Underhood Apron - Rear (Remove and Replace)을(를) 참조하십시오.
  2. 실내 흡기 덕트를 탈거합니다. 덕트 - 상단 - 실내 흡기(탈거 및 교체)을(를) 참조하십시오.
  3. 후드 래치 커버를 탈거합니다. Cover - Hood Latch (Remove and Replace)을(를) 참조하십시오.
  4. 후드 내 보관 유닛 카펫을 탈거합니다. Carpet - Underhood Storage (Remove and Install)을(를) 참조하십시오.
  5. 후드 내 보관 유닛을 탈거합니다. Underhood Storage Unit (Remove and Replace)을(를) 참조하십시오.
  6. LH 및 RH 전륜 휠을 탈거합니다. Wheel Assembly (Remove and Install)을(를) 참조하십시오.
  7. 전면 에어로 실드를 탈거합니다. Panel - Aero Shield - Front (Remove and Replace)을(를) 참조하십시오.
  8. 전면 페시아를 탈거합니다. Fascia - Front (Remove and Install)을(를) 참조하십시오.
  9. 고음 경적에서 전기 커넥터를 연결 해제합니다.
  10. 고음 경적을 캐리어에 고정하는 볼트를 탈거한 다음 차량에서 경적을 탈거합니다.
    9 Nm (6.6 lbs-ft)

    북미

    유럽/중동/아프리카

Install

Installation procedure is the reverse of removal.