2019-08-13

Hinge - Trunk - LH (Remove and Replace)

Correction code 11335802 NOTE: Unless otherwise explicitly stated in the procedure, the above correction code and FRT reflect all of the work required to perform this procedure, including the linked procedures. Do not stack correction codes unless explicitly told to do so. NOTE: See Flat Rate Times to learn more about FRTs and how they are created. To provide feedback on FRT values, email ServiceManualFeedback@tesla.com. NOTE: See 개인 보호 to make sure wearing proper PPE when performing the below procedure. See 인체공학적 주의 사항 for safe and healthy working practices.

Remove

  1. 트렁크 어셈블리를 탈거합니다. Trunk (Remove and Install)을(를) 참조하십시오.
  2. LH 트렁크 트림을 탈거합니다. Trim - Side - Trunk - LH (Remove and Replace)을(를) 참조하십시오.
  3. 마스킹 테이프를 사용하여 차체에 있는 트렁크 힌지의 위치를 표시합니다.
  4. LH 트렁크 가스 스트럿을 탈거합니다. Gas Strut - Trunk - LH (Remove and Replace)을(를) 참조하십시오.
  5. LH 트렁크 힌지를 차체에 고정하는 너트를 분리하고 차량에서 힌지를 탈거합니다.
    24 Nm (17.7 lbs-ft)

Install

Installation procedure is the reverse of removal.